Snap Hooks: Snap hooks are self closing/self locking connectors. The snap hooks provide an eye for permanent attachment of a lifeline or lanyard. For specifications see section 7.0. Carabiners: The self locking carabiners are self closing/self locking connectors.

Are locking snap hooks mandatory?

Self locking snap hooks and carabiners are required by ANSI Z359. 1 and OSHA. Compatibility between elements and components (i.e., body supports, connecting components, anchorage connectors and anchorage points) of a fall protection system are critical to help assure safety to the user.

What are the three components of a Pfas?

A PFAS (personal fall arrest system) consists of three major components: • a full-body harness; • a shock-absorbing lanyard or retractable lifeline; • secure anchors.

Can you tie off to rigging?

(5) Tie-off where the line passes over or around rough or sharp surfaces reduces strength drastically. Such a tie-off should be avoided or an alternative tie-off rigging should be used.

Can you tie off at your feet for fall protection?

In the world of Fall Protection, Foot Level Tie Off should be avoided if at all possible. Tie Off at Dorsal D-ring height or higher is always the preferred method, but in instances where this just isnt possible, Foot Level Tie Off is acceptable provided the right equipment and training are provided.

How high can you go on a ladder without fall protection?

24 feet Fixed ladders: fall protection must be provided for employees climbing or working on fixed ladders above 24 feet. 29 CFR 1926.1053(a)(19) states that fall protection must be provided whenever the length of climb on a fixed ladder equals or exceeds 24 feet.

Whose primary responsibility is it to determine if you are protected from falling?

Once it is determined that the work surfaces will safely support the work activity, the employer must determine whether fall protection is required (using the requirements set forth in 29 CFR 1926.501) and, if so, select and provide workers with fall protection systems that comply with the criteria found in 29 CFR