Question: How do you read a wheel date code?

The last four digits of this code tell you when your tire was manufactured. The first two numbers indicate what week of the year it was made (out of 52 weeks per year), and the second two numbers represent the year. For example, 5200 would reveal that a tire was manufactured during the 52nd week of the year 2000.

How do you read a wheel date?

Remember that the last four digits of the code are the date the tire was manufactured. You can check the first two digits of the DOT code to know the week of the manufacturing. The last two digits will reveal the manufacturing year. For instance, when it was written in 0203, the manufacturing year was 2003.

How do you read a Bridgestone tire date code?

If the tyre was manufactured after the year 2000, then you can determine its age by looking at the last four digits of this number. These represent the week the tyre was made, followed by the year. In the case of the serial number used above, the “18” would indicate the 18th week, and the “00” would indicate 2000.

What do the numbers on my wheel mean?

The two-digit number after the slash mark in a tire size is the aspect ratio. For example, in a size P215/65 R15 tire, the 65 means that the height is equal to 65% of the tires width. The bigger the aspect ratio, the bigger the tires sidewall will be.

How old a tire is still safe?

While theres no federally sanctioned safety guidance on when a tire is too old to be safe, many carmakers recommend replacement at six years from the date of manufacture. Old tires have been the culprit in fatal accidents.

How do you read a Bridgestone tire size?

1:372:42How to Read Tire Size | Bridgestone - YouTubeYouTube

Can I put different size tires on my car?

The short answer is: Yes. But does wheel size matter? Tires are a part of the wheel setup. For instance, your vehicle has a set size of rims, but you can buy different sizes of tires to fit those rims, as long as the middle of the tires is the correct size.

Can you drive on a 10 year old tire?

While theres no federally sanctioned safety guidance on when a tire is too old to be safe, many carmakers recommend replacement at six years from the date of manufacture. Old tires have been the culprit in fatal accidents. An analysis of the used tire revealed that it was nearly 10 years old.

How do you read Michelin tire codes?

The first two numbers represent the week of manufacture, the last two numbers indicate the year. On this Michelin tire, the date code is “2118.” Which indicates the tire was manufactured in the 21st week of the year. The number “18” represents the year 2018.

Which tire is taller 225 or 235?

03. How Much Bigger is a 235 Than a 225? The width of a 235 tire is 10mm wider than that of a 225 tire. A 235 tire also has a 15mm bigger diameter and is 7.5mm taller than a 225 tire.

Is it OK to replace 3 tires at a time?

Is your car an all-wheel drive (AWD)? If so, most vehicle manufacturers and the Tire Industry Association (TIA) recommend that you always replace all four tires at the same time. Thats because the reduced diameter of the lower-tread tires causes them to spin faster than the new one.

Write us

Find us at the office

Klank- Fillhart street no. 8, 52340 San Juan, Puerto Rico

Give us a ring

Jermya Lenninger
+88 940 846 744
Mon - Fri, 9:00-18:00

Tell us about you