As Bruce stated, the power cords are universal. Even some monitors (generally older CRT models with detachable cords) and some printers use the same type of cords. Power cords for desktop computers are the same. There are regional differences due to the configuration of the plugs around the world, but that is it.

Are all power supply cords the same?

The input power cords are pretty standard. If you had a really high wattage power supply you might want a heavier gauge wire, but otherwise the power supply has a standard power input.

Can I use any power cord for my PSU?

Any cable will work. A 1,000W power supply (80% efficient) will pull about 10 amps at full load. Thats well within the specs of any of those cables. Some compaines do sell heavier duty cables, with larger wires in them, but theres no need in this case.

Are power cords universal?

OverviewA universal power cord is used to transfer power between different devices. Considerations The first thing you need to remember about universal power cords is that theyre not quite as universal as youd hope. There are different types of such cords available in the market, all with varying characteristics.

Does it matter what cord you use for power supply?

If you are referring to the 110 VAC power cord there is no problem as to which cord you use. However, the cables that connect from the PSU to the motherboard, devices, graphics card, etc. are not inter-changeable from one brand to another.

Can you mix and match power supply cables?

Do not use modular cables meant for one PSU in a different one. Modular cables have no standard, and thus are proprietary to each manufacturer. They even vary between models made by the same manufacturer in some cases. If you do, you risk short circuiting and damaging your components, and the PSU as well.

Can I replace PSU cables?

Now, there is only ONE way to get an exact replacement set of cables for it and that is through EVGA, much as for pretty much all power supplies the only way to get a replacement set of cables is through whoever the PSU was sold by, EVGA, Seasonic, Corsair, Antec, Rosewill, Super Flower, etc.

Can you use any power supply?

Its quite safe to install a power supply with a higher wattage rating than the power supply its replacing. The wattage rating only indicates what the power supply is capable of. Actual power use is determined by the computers power requirements.

What is the end of a power cord called?

One end of the power cords has the plug and the other end has a connector. The connector is inserted in the receptacle and the plug is plugged in the wall socket. Both these ends can be of male or female origin.

Can you replace a power cord on a TV?

The majority of television manufacturers will sell you a replacement power cord for the price of the cord plus shipping. If your television is still under warranty, it may replace the cord for free.

Are all EVGA power supply cables compatible?

Most of EVGAs fully-modular power supplies are compatible with the cable sets of each other, or will be noted otherwise. As noted above, power supplies may be compatible with sets designed for a higher or lower wattage.

Can I use old cables with new PSU?

I wouldnt recommend it, you will run into some issues. Mainly because even if its the same brand and the plugs fit, you never know if they havent changed the pin layout or something.

Is it okay to use an old power supply?

While old power supplies might still work, it could be because your old PC hardware didnt need too much power. Upgrading the CPU, motherboard, and graphics card could change that. A supply that fails can, in the worst case, take out other components in your PC or even catch fire.

Is it bad to have too big of a PSU?

No, an overkill power supply will not damage your PC. Its not forcing excess power into your system. Your system takes what it needs. PSUs are generally most efficient at half load, so if your machine uses 350 watts max, getting a 650 or 750 watt psu would save energy, and a 1000 watt would waste a little.

What is a power cord called?

A power cord, line cord, or mains cable is an electrical cable that temporarily connects an appliance to the mains electricity supply via a wall socket or extension cord.

What does a power cord do?

A power cord consists of cable with a country-specific plug (molded or hand-wired) on one end and exposed conductor wires, terminated conductors, or blunt/flush cut conductors on the other end. A power cord is used to connect the equipment directly to the power mains.

Do TV power cords go bad?

If your LG TV wont turn on at all, its possible your power cable is bad. Look for obvious signs of damage, such as if a dog chewed through the cord or if its tightly kinked behind the TV. Also, unplug the cord from the wall and the TV, then plug it back in. If the TV still wont turn on, your cord may be bad.

How do you replace a power cord plug?

Steps on How to Replace and Wire a Plug:Step 1: Cut the Old Plug and Slice the Jacket. First, cut off the damaged plug. Step 2: Attach Wires to Terminal Screws. Open the replacement plug so you can reach the terminal screws inside. Step 3: Reassemble Plug Replacement. Step 4: Test the cord.