The drain is connected to your P-trap and plumbing connection hidden within the walls. Tailpiece: Often referred to as the drain tailpiece, this is the section of piping that connects to the drain fitting. It carries water away from the sink. Water supply lines: These attach to the sinks faucet controls.

What is the piece that connects to the bottom of a sink?

The tailpiece, or sink tailpiece, is the straight section of pipe that connects to the bottom of the sink drain fitting. If the sink has a pop-up drain, the lever rod of the drain assembly connects to a port on the back of the tailpiece.

Why use plumbers putty on sink drain?

It is commonly used when installing bathroom sink drains, and provides a leak-proof seal that can last several years. Plumbers putty stays soft for a long time, making it easy to remove the drain and make corrections, if necessary. Let water and debris inside the P-trap drain into the bucket.

What is the ring around the sink drain called?

The drain collar, or flange, in your bathroom sink helps connect the waste pipe and drain of your sink. Over time, the metal of the collar can become discolored, rusted or cracked, which means that it needs to be replaced.

What is the thing next to the faucet?

Its actually an essential part of your kitchens plumbing. A dishwasher air gap (sometimes called a “kitchen air gap” or “kitchen sink air gap”) is usually a small metal cylinder near your sink faucet with a few holes in it, designed to prevent dirty water from draining back into your dishwasher.

What is sink p-trap?

What is a P-trap? A P-trap is a plumbing fixture that has several purposes. It traps debris that has drained from the sink and prevents it from forming a clog deep within the plumbing system, and to stops sewer gases from passing into the home.

What is a Hudee ring for?

With a hudee ring, the edge of the sink could be flush with the countertop, protecting the plywood layers beneath. By preventing water from entering these deeper layers of the counter, it would prevent the separation of plywood layers and lengthen the lifespan of the countertop.

What is the difference between a J bend and a p-trap?

The J-bend beneath the sink is also referred to as the P-trap, the U-bend and sometimes even just the drain trap. In some cases, however, hand-tightening may not seat the washer correctly, particularly if your drain pipes are metal, so slip-joint pliers will often come in handy.

Can I use silicone caulk on sink drain?

Both plumbers putty and silicone caulk provide a watertight seal for a sink drain. You must seal the area between a sinks drain body and the actual sink surface. Otherwise water will leak out between the two and begin dripping under the sink.

What is a Hootie ring?

Vances Stainless steel rim for kitchen and bathroom sinks is commonly known as a hudee ring. It is available in 18 standard sizes, including round or oval. All sink frames come complete with installation hardware.

How do you replace a sink drain flange?

Here are the steps you need to follow:The first thing you need to do is remove the sink drain stopper. In this step, you prepare to remove the sink drain. Now unscrew the P-trap and tailpiece of the drain. Next, you need to unscrew the sink drain flange. You can now remove the sink flange.More items